TP-Link 16-port Gigabit Easy Smart Desktop/Rackmount PoE+ preklopnik (Switch), 16×10/100/1000M RJ45 ports, 8×PoE+ ports, metalno kućište

SKU: 30942

236,70  (1.783,42 kn)

Cijena za plaćanje gotovinom, internet bankarstvom ili karticama Visa i Maestro jednokratno:
224,87  (1.694,28 kn)

Besplatna dostava za narudžbe iznad 66,49€ (500,96 kn)

Brza dostava

u roku 2 - 3 dana


do 24 rate bez kamata

Mogućnost povrata

u roku od 14 dana



– The TL-SG1016PE is an 16-Port Gigabit Desktop/Rack mountable Switch with 8 ports supporting the PoE+ standard
– It provides a simple way to expand a wired network by transferring power and data over a single Ethernet Cable
– With a total power budget of 150 W* up to 30 W per port TL-SG1016PE powers more high-powered devices such as wireless Access Points (APs) IP Cameras or IP Phones
– Moreover with innovative energy-efficient technology the TL-SG1016PE saves the power consumption making it an eco-friendly solution for your business network

– 8 ports of TL-SG1016PE support Power over Ethernet Plus (PoE+) standard which can automatically detect and supply power to any IEEE 802.3af/at compliant device(s)
– In this situation the electrical power is transmitted along with data in a single cable allowing you to expand your network where there are electrical cables or outlets where you wish to fix devices such as APs IP Cameras or IP Phones

– TL-SG1016PE has a priority function which helps protect the system when its power is overloaded
– If all PoE+ devices’ power consumption is greater than or equal to 150 W a priority will be arranged among the 8 PoE+ ports at which point the system will cut off the power of the lowest-priority port

– Priority (port 1>port 2>port 3>port 4> port 5>port 6>port 7>port 8): This function will help protect the system if the system power becomes overloaded
– For example Port 1 2 3 4 and 6 are using 30 W (maximum power per port is 30 W) the system power is 150 W in total (PoE max LED will be green if all PoE PDs power consumption is >= 150W)
– If there is an additional PD inserted to Port 5 with 20 W then the system will cut off Port 6 to protect the system this means Port 1 2 3 and 4 will use 120 W and Port 5 will use 20 W and no power will be supplied to Port 6

– 16× 10/100/1000Mbps RJ45 ports
– Equipped with 8× PoE+ supported ports to transfer data and power over a single cable
– With a total PoE power budget of 150 W* up to 30 W per port
– Works with IEEE 802.3af/at compliant devices expanding home and office networks
– Simple network set-up on top of plug-and-play connectivity
– Web-based user interface and management utility simplify configuration

Standards and Protocols: IEEE 802.3i IEEE 802.3u IEEE 802.3ab IEEE 802.3x IEEE 802.1q IEEE 802.1p
– Interface: 16× 10/100/1000 Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX
– Network Media:
* 10BASE-T: UTP category 3 4 5 cable (maximum 100m)
* EIA/TIA-568 100Ohm STP (maximum 100m)
* 100BASE-TX: UTP category 5 5e cable (maximum 100m)
* EIA/TIA-568 100Ohm STP (maximum 100m)
* 1000BASE-T: UTP category 5 5e 6 or above cable (maximum 100m)
* EIA/TIA-568 100Ohm STP (maximum 100m)
– Fan Quantity: 1
– Physical Security Lock: Yes
– PoE Ports (RJ45):
* Standard: 802.3 af/at compliant
* PoE Ports: Port 1 to Port 8
* PoE Power Budget: 150 W
– Dimensions (W×D×H): 294×180×44 mm
– Mounting: Rack Mountable/ Desktop
– Max Power Consumption:
* 8.07 W (110 V/ 60 Hz with no PD connected)
* 177.67 W (110 V/60 Hz with 150 W PD connected)
– Max Heat Dissipation:
* 27.52 BTU/h (with no PD connected)
* 605.85 BTU/h (with 150 W PD connected)

– Switching Capacity: 32 Gbps
– Packet Forwarding Rate: 23.8 Mbps
– MAC Address Table: 8K
– Packet Buffer Memory: 4.1 Mbit
– Jumbo Frame: 10 KB

– Quality of Service:
* Support Port-Based/802.1p/DSCP priority
* Support 4 priority queues
* Rate Limit
* Storm Control
– L2 Features:
* IGMP Snooping V1/V2/V3
* Static Link Aggregation
* Port Mirroring
* Cable Diagnostics
* Loop Prevention
* Supports up to 32 VLANs simultaneously (out of 4K VLAN IDs)
* MTU/Port/Tag VLAN
– Management: Web-based GUI Easy Smart Configuration Utility
– Transmission Method: Store-And-Forward

– Certification: FCC CE RoHS
– Package Contents: TL-SG1016PE Power Cord Installation Guide Resource CD Rackmount Kit Rubber Feet
– System Requirements: Microsoft Windows for running Utility
– Environment:
* Operating Temperature: 0C – 50C (32F – 122F)
* Storage Temperature: -40C – 70C (-40F – 158F)
* Operating Humidity: 10% – 90% non-condensing
* Storage Humidity: 5% – 90% non-condensing