TP-Link 8-port Gigabit PoE+ preklopnik (Switch), 8×10/100/1000M RJ45 PoE ports, 802.3af/at, metalno kućište, 1U 13″ (126W)

Šifra: 30948


Cijena za plaćanje gotovinom prilikom dostave, internet bankarstvom ili Maestro i Visa karticom jednokratno.


Nema na zalihi

Brza dostava

u roku 2 - 3 dana


do 24 rate bez kamata

Mogućnost povrata

u roku od 14 dana


60 mjeseci


– The TL-SG1008MP is an 8-Port Gigabit Desktop/Rack mountable Switch with all 8 ports supporting the PoE+ standard. It provides a simple way to expand a wired network by transferring power and data over a single Ethernet Cable. With a total power budget of 153W, up to 30W per port, TL-SG1008MP can power more high-powered devices such as wireless Access Points (APs), IP Cameras or IP Phones. Moreover, with innovative energy-efficient technology, the TL-SG1008MP can save the power consumption, making it an eco-friendly solution for your business network.
How This Product Works
All 8 ports of TL-SG1008MP support Power over Ethernet Plus (PoE+) standard which can automatically detect and supply power to any IEEE 802.3af/at compliant device(s). In this situation, the electrical power is transmitted along with data in a single cable, allowing you to expand your network where there are no electrical cables or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones.

– TL-SG1008MP has a priority function which helps protect the system when its power is overloaded. If all PoE+ devices’ power consumption is greater than or equal to 153W, a priority will be arranged among the 8 PoE+ ports, at which point the system will cut off the power of the lowest-priority port.

– Priority (port 1 > port 2 > port 3 > port 4 > port 5 > port 6 > port 7 > port 8): This function helps protect the system if the power becomes overloaded. For example, if port 1, 2, 4, 5 and 7 are using 30W (maximum power per port is 30W, the system power is 153W in total), and there is an additional device inserted into Port 3 at 25W, the system will cut off the power of Port 7 in response to the power exceeding the 153W limit., This means Port 1, 2, 4 and 5 will use 30W, and Port 3 will use 25W, with no power will be supplied to Port 7 as it has the lowest designated priority among the ports in use.

– TL-SG1008MP is easy to install and use. It requires no configuration or installation. With its Desktop/Rack mountable design, outstanding performance and quality, the TP-Link TL-SG1008MP 8-Port Gigabit Desktop/Rack mountable Switch with 8-Port PoE+ is a great choice for expanding your home or office network.

– 8 10/100/1000Mbps RJ45 ports
– Equipped with 8 PoE+ supported ports to transfer data and power over a single cable
– Works with IEEE 802.3af/at compliant devices, expanding home and office networks
– Innovative energy-efficient technology reduces power consumption
– Supports PoE+ standard with total power budget of 153W* and up to 30W per port
– Plug and play design, no configuration required

– Interface
* 8 10/100/1000Mbps RJ45 Ports
* AUTO Negotiation/AUTO MDI/MDIX
– Network Media
* 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
* EIA/TIA-568 100? STP (maximum 100m)
* 100BASE-TX: UTP category 5, 5e cable (maximum 100m)
* EIA/TIA-568 100? STP (maximum 100m)
* 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m)
* EIA/TIA-568 100? STP (maximum 100m)
– Fan Quantity: 1
– Physical Security Lock: No
– Power Supply: 100-240VAC, 50/60Hz
– Packet Forwarding Rate: 11.904 Mpps
– PoE+ Ports(RJ45) Standard: 802.3af/at compliant
– PoE+ Ports: 8 Ports
– Power Supply: 153W
– Mac Address Table: 4K
– Buffer Size: 1.5Mbits
– Jumbo Frame: 16 KB
– Switching Capacity: 16Gbps
– Dimensions ( W x D x H ): 11.6*7.1*1.7 in. (294*180*44 mm)
– Mounting: Desktop/Rack Mountable
– Max Power Consumption:
* 7.31 W(220V/50Hz. no PD connected)
* 177 W(110V/60Hz. with 153W PD connected)
– Max Heat Dissipation
* 24.93 BTU/h(no PD connected)
* 603.57 BTU/h(with 153W PD connected)

– Advanced Features
* Compatible With IEEE 802.3af/at Compliant PDs
* Priority Function
* Mac Address Auto-Learning And Auto-Aging
* IEEE802.3x Flow Control For Full-Duplex Mode And Backpressure For Half-Duplex Mode
– Transfer Method: Store-And-Forward

– Certification: FCC, CE, RoHS
– Package Contents: TL-SG1008MP, Power Cord, Installation Guide, Rackmount Kit, Rubber Feet
– Environment: Operating Temperature: 0?~50? (32?~122?)
– Storage Temperature: -40?~70? (-40?~158?)
– Operating Humidity: 10%~90% non-condensing
– Storage Humidity: 5%~90% non-condensing